To improve on an already great tandem is a real challenge. But we took time to collect impressions and feedback from many pilots around the world, analysed and implemented improvements.  

The result is the new RIDE3. With even more stability, better take-off behaviour, more agile handling, an improved usable trim-range, as well as more overall performance and better climb ability in thermals. 

 

The RIDE was already well known for its easy take-off characteristics. The canopy of the RIDE2 rises even easier overhead. It demands less power and therefore take-off is better, even in challenging conditions. 

 

The RIDE3 shows an even higher stability than its predecessor. In addition, the complete trim range is more usable, also in turbulent conditions. Even with trimmers in the fully opened position, the glider is very stable at speed and exhibits minimal sink rate without sacrificing glide.  

The RIDE3 also features the typical ‘AirDesign Comfort-in-Flight’ feel. This means stress-free flying, even in rough conditions. The glider dampens turbulence well and is extremely confidence inspiring.

 

Entering thermals, you will immediately notice that the handling is much more agile. The RIDE3 is very responsive under brakes and its handling is extremely well balanced. Once in a thermal, the wing turns with only minimal effort – similar to a solo-wing and tight turns can be made with ease. The reduced brake pressure is comfortable, provides solid feedback, and exhibits a progressive feel right through to the stall point ensuring that landing effort is simplified with increased flare ability. 

 

By implementing RazorEdge technology it was possible to increase the RIDE3’s glide performance markedly. This special trailing edge sail-shape provides cleaner, more effiencient airflow, therefore reducing drag. It also features a 3D-cut leading edge, further improving performance, safety and overall flying characteristics.

 

We had already done long-term tests with the RIDE. Even after 600 flights , take-off behaviour remained unaltered. With the RIDE3, sensitive areas such as the leading edge, have been improved and supported to make sure that the take-off behaviour and flying characteristics reliably remain for an even extended lifespan.

 

• The leading edge is supported by polyamide rods, which ensure a constant inflation and good take-off behaviour over the full lifespan of the wing. 

• Optically, the leading edge is outstandingly aerodynamically clean, which produces a performance advantage in flight. The RIDE3 is equivalent in performance to high-end LTF/EN-B solo gliders. 

• The RIDE3’s trimmers allow for positive or negative trim range options. With trimmers open for light loading and in stronger conditions - or closed when higher wing loadings, the RIDE3 will deliver consistent and comfortable flying characteristics throughout the entire weight range. 

• The line layout utilises a combination of sheathed Dyneema and Aramid lines to maximise stability and durability throughout the life of the wing. The upper cascade is designed with increased line attachment points also with the integral element of longevity in mind.

• Spreader bars come standard with dual hang points 

• Split A-risers for easy big-ears

• 3D-Cut for a more efficient nose-shape and enhanced performance

• RazorEdge technology reduces drag at the trailing edge

 

 
 

b_450_0_16777215_00_images_colours_wings.RIDE2.colours.png

FIRE                                                              OCEAN

 
SIZE 38
AREA FLAT (m²) 37,95
AREA PROJECTED (m²) 31,96
SPAN FLAT (m) 13,97
SPAN PROJECTED (m) 10,99
ASPECT RATIO FLAT 5,14
ASPECT RATIO PROJ. 3,78
CELLS 48
TOTAL LINE LENGTH 410
TOTAL LINES 266
LINE DIAMETERS 0.95/1.4/1.8/2.4
WEIGHT (kg) 7,8
V-TRIM/V-MAX (km/h) 39/45*
LTF/EN CATEGORY EN/LFT-B
TAKE OFF WEIGHT (kg) 120-190
* at 170kg  

 

Materials: 

Sail:

Top Sail: Dominico 30D (40g)

Bottom Sail: Dominico 30D

Ribs: Dominico 30D hard 

Lines:

Top lines:  LIROS DSL70

Middle lines: LIROS PPSL200

Main lines: Edelrid 6843-340, 7343-280

Risers:     25mm nylon webbing                    Maillons:  JOO Tech, 4mm triangle            

 

 

 
LTF/EN Testreport  Manual Brochure
LTF-EN Cerrtificates  Line plan RIDE2 logo
           Linelength                 Inspection / Service Instructions               
 

Gliderb_450_0_16777215_00_images_accessories_inthebag.341.th.jpg

AirDesign AirPack

AirDesign gliders bag (approx. 160 litre capacity) 

Spreaderbar

Folder with manual USB stick

repair kit and AirDesign stickers

surprise present